products-DIN536Rail

Type:Crane Rail

Standard:DIN

Material:ASSZ-1/U75V/U71Mn/1100/900A/700

DIN536  Rail is a type of crane rail used in overhead gantry and floor-mounted crane for port, wharf, shipyards, warehouses, and other manufacturers. It complies with the European DIN standard.  This standard is specified to hot-rolled flat bottom crane rails(type A). The minimum tensile strength of this standard is required to be 690N/mm2. The actual tensile strength of the material may be less than the minimum value. Its height is lower, the head width and web thickness are larger. Therefore, the DIN536 crane rail can support great pressure from cranes. Its dimensions, profile, and steel grades are as shown in the diagram below.

DIN536 Crane Rail Profile

DIN536 Profile

DIN536 Specifications

SizeHead (mm)Height (mm)Base (mm)Web (mm)Nominal weight (kg/m)MaterialLength m
A4545551252422.1700/900A/110010-12
A5555651503131.8700/900A/110010-12
A6565751753843.1700/900A/110010-12
A7575852004556.2700/900A/110010-12
A100100952006074.3700/900A/110010-12
A12012010522072100700/900A/110010-12
A15015015022080150.3700/900A/110010-12

DIN536 chemical composition analysis

GradeStandard CSiMnPSV
690DIN536-1  Min0.400.80
           Max0.600.351.200.0450.045
880DIN536-1  Min0.600.80
           Max0.800.501.300.0450.045

The  strength requirements

GradeMinimum yield(Mpa)Minimum UTS(Mpa)Hardness(HBN)
690355690204
880440880260

If you are looking for other types of railroad rails for sale, AGICO’s professional teams can give you a hand. Always feel free to contact us.

Scroll to Top